• logo
  • language-switch world icon
    • English
    • Deutsch
    • Español‎
  • Products
    • Pre-wired Systems
    • Inverter On Grid
    • Inverter Off Grid
    • Inverter/Charger
    • Charge Controllers
    • Solarmodules
    • Batteries
    • Solar Pumps | Submersible
    • Fridge Freezer
    • LED bulbs
  • Accessories
    • OutBack
    • Rolls Batteries
    • Studer
    • Steca
  • Software
    • Outback
  • Manufacturers
  • Contact
Products Inverter/Charger XTH 3000-12
  • Description

    The Xtender series is comprised of three groups by power level corresponding to the XTS, XTM and XTH models. Whether configured individually, in parallel, split-phase, or three-phase, these devices allow for complete flexibility with respect to the desired energy system concept.

    With its sophisticated software, the Xtender can be used in a wide range of applications. The Xtender series products are ideal devices for specific markets that need revolutionary solutions with all types of battery technologies.

    Ease of use
    The Xtender fulfils the requirements of the majority of applications with its factory settings, which makes it a plug & play device. Energy flows automatically and the auxiliary contacts are configured to provide genset auto-start and alarm functions. 

    The LEDs on the Xtender front panel allow the user to see in a quick glance how the device is working.

    5 in 1
    The Xtender is a true energy manager, unique and compact, that has 5 main functions. It can be an off-grid inverter, battery charger, current injector, transfer system and provide support to an AC source. With these functions, the available energy can be managed and used in an intelligent and efficient manner.

    Specification

    Product No. I1122
    Inverter:  
    Nominal battery voltage 12Vdc
    Input voltage range 9.5 - 17Vdc
    Continuous power @ 25°C 2500VA
    Power 30 min. @ 25°C 3000VA
    Power 5 sec. @ 25°C 7.5kVA
    Maximum load Up to short-circuit
    Maximum asymmetric load Up to Pcont.
    Load detection (stand-by) 2 to 25 W
    Cos j 0.1-1
    Maximum efficiency 93%
    Consumption OFF/Stand-by/ON 1.2W/1.4W/14W
    Output voltage Pure sine wave 230Vac (+/- 2%) / 120Vac (1)
    Output frequency 50Hz / 60Hz (1) +/- 0.05% (crystal controlled)
    Harmonic distortion <2%
    Overload and short-circuit protection Automatic disconnection with 3 time restart attempt
    Overheat protection Warning before shut-off - with automatic restart
    Battery charger:  
    Charge Characteristic 6 steps : Bulk-Absorption-Floating-Equalization-reduced floating-periodic absorption
    Number of steps, thresholds, end current and times completely adjustable with the RCC-02/-03
    Maximum charging current 160A
    Temperature compensation With BTS-01 or BSP 500/1200
    Power Factor Correction (PFC) EN 61000-3-2
    General data XTH 3000-12
    Input voltage range 150 to 265Vac / 50 to 140Vac (1)
    Input frequency 45 to 65Hz
    Input current max. (transfer relay) / Output current max. 50Aac/56Aac
    Transfer time <15ms
    Multifunction contacts 2 independent contacts (potential free 3 points, 16Aac/5Adc)
    Weight 34 kg
    Dimension hxwxl [mm] 230x300x500
    Protection index IP20
    Conformity Directive EMC 2004/108/EC : EN 61000-6-1, EN 61000-6-3, EN 55014, EN 55022, EN 61000-3-2, 62040-2
    Low voltage directive 2006/95/EC : EN 62040-1-1, EN 50091-2, EN 60950-1
    Operating temperature range -20 à 55°C
    Relative humidity in operation 95% without condensation
    Ventilation Forced from 55°C
    Acoustic level <40dB / <45dB (without/with ventilation)
    Warranty 5 years
    Accessoires:  
    Remote control RCC-02 or RCC-03 ✓
    Module XCOM-232i ✓
    Bridge XCOM-MS ✓
    Remote Control Module RCM-10 (3 m)  
    2 aux. contacts module ARM-02  
    Cooling Module ECF-01  
    Battery temp. sensor BTS-01 (3 m) ✓
    Communication cable for 3ph and // CAB-RJ45-8-2 ✓
    Mounting frame X-Connect ✓

    * Adjustable with the RCC-02/-03
    ** These features are valid only when using the cooling module ECF-01.
    (1) With -01 at the end of the reference, means 120V/60Hz. Available for all Xtenders except XTH 8000-48

  • Product image

    Studer XTH 3000-12
    Studer XTH 3000-12

    Download

    Studer - Xtender Series.pdf (685.9 KiB)
  • © Gimborn Trading S.L. 2023

  • Imprint