Steca PA 15
Accessories for Steca Power Tarom
The Steca Power Tarom charge controllers send out sig- nals (125 kHz on 300 Baud) which are modulated on the DC cable and received by the Steca PA 15 remote control.
These signals contain information on the batteries‘ state of charge (SOC). The Steca PA 15 features five different operating modes (see below) which can be set using five different jumper positions. The maximum switching capacity of 15 A can be increased with a Steca PA EV200 DC relay to up to 200 A if desired.
Product No. R1257 Characterisation of the operating performance: Power supply 10.5 V … 60 V DC, 5 mA Data transmission 300 Baud Transmission frequency 125 kHz signal frequency,
450 kHz intermediate frequency
DC output side: Load current 15 A; 10 A at 40°C; 100 A pulse < 10 µs Safety: Overload protection by 15 A fuse Wrong polarity protection fuse Operating conditions: Ambient temperature -10 °C … +50 °C Fitting and construction: Terminal (fine / single wire) 2.5 mm² / 4 mm² - AWG 14 / 12 Degree of protection IP 22 Dimensions (X x Y x Z) 98 x 87 x 34 mm Weight 110 g